Bottom drain valve of the aggregation kettle system
1. Introduction to On-site Application Conditions
The valve type used in the process pipeline of the valve device in the rolling mill high-line cooling water system is a straight-stroke bottom-in three-way flow regulating valve. The medium is circulating cooling water, and the water quality contains iron filings and other impurities.
2. Problems and Challenges Faced
The valve type used in the process pipeline of the valve device in the rolling mill high-line cooling water system is a straight-stroke bottom-in three-way flow regulating valve:
1/ Quick opening performance: Single opening time is about 3 seconds;
2/ High-frequency performance: Switch once per minute;
3. EICMATION's Recommended Solution
In response to the above problems, our company has improved on the basis of conventional three-way valves. The diaphragm-type cylinder is changed to a high-frequency, high-thrust piston-type cylinder, the valve stem uses precipitation-hardened stainless steel, and the valve stem packing gland uses a high-frequency wear-resistant structure, which effectively meets the requirements of quick opening performance and high-frequency performance.
More Industry Applications
AISENBERG GmbH
Tel: +49 02161 3046062
E-mail: info@eicmation.de
Address: Willicher Damm 129, 41066 Mönchengladbach, Germany
China Headquarters: Eic (Shanghai) Pipeline Control System Co., Ltd.
Tel: +86 021 6380 85731
Email: info@eicmation.com
Address: 16F, Changhui Building, No. 799, Yinxiang Road, Jiading District, Shanghai
China Factory: Eicmation (Jiangsu) Fluid Control System Co., Ltd.
Tel: 400-670-1280
Email: info@eicmation.com
Address: North Shengye Road, Valve Industrial Park, Nanyang Town, Dafeng District, Yancheng City, Jiangsu Province
Copyright © 2025 Eicmation (Jiangsu) Fluid Control System Co., Ltd. All Rights Reserved.